Frequently asked questionsFAQs

Solar can power your home directly and store surplus energy in the battery. This reduces grid purchases when generation matches your needs; savings depend on usage, system size and your local tariff.

Yes, if it was stored in the battery during the day. Stored solar energy can reduce evening grid purchases until the battery reaches its reserve or its power limit.

For Caribbean homes planning around outages, a correctly configured backup system can isolate from the grid and supply selected essentials using available solar and battery energy. Runtime depends on charge and loads; an empty battery and insufficient sunlight cannot sustain backup. Supply fluctuations and sensitive appliances should be discussed during the site assessment.

With the grid available, it can supply your home when stored energy is reserved and solar is unavailable. Reaching the reserve does not necessarily mean the battery is empty. Grid electricity still incurs normal charges.

In a compatible hybrid system, solar can supply part of your demand and the grid can cover the shortfall. This still reduces grid purchases. Our example keeps the battery in reserve; actual sharing depends on settings and available energy.

Yes, while usable charge and power are available. Solar and the battery can supply your home together, reducing grid demand. The grid may also contribute if supported by the configuration; this does not remove the system’s power limits.

Start with our free assessment form. Share your property location, electricity needs and backup priorities so our team can discuss a suitable system with you.

Yes. Choose Basic, Plus or Premium as a starting point. Our engineers will review your roof, when you use electricity, the appliances you run together and your backup priorities, then fine-tune the panels, battery capacity and system design to suit your home. Any changes and the final price will be confirmed in your proposal.

Your property location, a recent electricity bill and the appliances you want to keep running during an outage are a useful starting point. If available, photos of your roof and installation space can help explain your needs. Leave out account numbers and other sensitive details that are not needed for your inquiry.

No. You can use the homepage calculator and start a consultation without signing in. For an inquiry, provide an email address where our team can reach you.

When the Contact us message form is available, choose Add photos to open the photo editor. It accepts JPG, PNG and WebP images and compresses them before sending. If you use the consultation form instead, tell us that you have photos to share with the team.

Your routine affects how much solar energy you use at home and how much electricity you still buy from the grid. Running suitable appliances during sunny hours can help you use solar power directly. If most of your electricity use is after sunset, battery storage becomes more important. Share when you normally use air conditioning, cooking appliances and other main loads so we can match the system to your routine.

Often, yes. When your main appliances run during sunny hours, solar can supply them directly, so you may need less battery storage for later. We still consider your evening and overnight use, the appliances you want to keep running during a power cut and how long you need backup.

Usually, yes. A larger battery can store more daytime solar energy for the evening and overnight. We size it around the appliances you use, how long they run and the reserve you want for outages. Your panels also need to generate enough surplus during the day to recharge it; a bigger battery alone does not generate more electricity.

They affect how much sunlight the panels receive and when they produce electricity. East-facing panels tend to produce earlier in the day, while west-facing panels tend to produce later. Our engineers assess your roof's direction, slope and available space alongside your electricity use to plan a suitable layout.

Yes. Trees, nearby buildings and cloud cover can reduce the sunlight reaching your panels. Shade can move across the roof during the day and through the year, so our engineers consider it when planning the layout. A battery can help cover a shortfall while usable charge and power are available; the grid can also contribute when connected.

No. A suitable system balances your daytime and overnight use, roof space, expected solar generation, backup needs and budget. Extra panels or battery capacity add value when you can use the additional energy or storage. We use your chosen package as a starting point and recommend adjustments that suit your home.

This calculator provides a planning scenario for homes in Antigua using an APUA reference tariff. It is not a live tariff or a quotation. For a property in Dominica, use the Dominica calculator and its separate reference assumptions.

Use your monthly electricity charges only. Do not include overdue balances, water charges or other services. Move the bill slider on the homepage to the closest amount; there is no need to enter your monthly kWh.

It uses the October 2026 preset, including an EC$0.88/kWh fuel surcharge. This is a fixed reference, not a live electricity rate. The question mark beside the bill slider provides the sources and assumptions.

No. The calculator assumes an 80% bill reduction to provide a planning scenario, not a quotation. Actual savings depend on the final system, electricity usage, site conditions and applicable tariff. Discuss your property with our team before making a purchase decision.

No. The budget uses the starting price of the Basic, Plus or Premium package recommended for your estimated home electricity use. Simple payback is that starting price divided by estimated annual savings, using the calculator’s bill-saving assumption. A higher final price or lower savings increases the payback period; financing, maintenance and replacements are excluded. Request an assessment to confirm the configuration, included work and final quote.

The displayed backup time assumes a full battery and a constant 1 kW average load, with no solar contribution during the outage. Actual runtime changes with the appliances in use. The preview is not a guarantee that every appliance in your home can run together.

The following standards and certifications are listed for our Antigua product range. Applicability depends on the selected model and its supporting documents. Inverter — Grid connection: IEEE 1547-2018, IEEE 1547.1-2020, SRD2.0. Safety / EMC: UL 1741, CSA C22.2 No.107.1, UL 1741 CRD, UL 1741 SB, FCC Part 15 Class B. AFCI: UL 1699B. Software approval: UL 1998. Battery — UN 38.3, CEC, UL 1973, UL 9540A, UL 9540. Ask our team for the certificates, listings and test reports applicable to your proposed equipment. These references do not replace project-specific utility connection approval.

The following standards and certifications are listed for our Dominica product range. Applicability depends on the selected model and its supporting documents. Inverter — Grid connection: EN 50549, NRS 097-2-1. Safety / EMC: IEC 62109-1/-2, IEC/EN 61000-6-1/-2/-3/-4. Battery — IEC 62619, UN 38.3, CE-EMC. Ask our team for the certificates, declarations and test reports applicable to your proposed equipment. These references do not replace project-specific utility connection approval.

A suitably sized solar and battery system can support everyday household appliances, including a refrigerator with round-the-clock power needs, air conditioning, a washing machine, lights throughout the house, TVs, WiFi and other electronics. Water heating can also be planned for daytime use to make the most of solar generation. Our engineers tailor the inverter and battery capacity to the appliances you use together and what you would like to keep running during an outage, so the system fits your daily routine.

Our home storage batteries use Lithium Iron Phosphate (LiFePO4, also called LFP), a lithium-ion battery chemistry. The battery stores energy for household use and backup. The capacity needed depends on your appliances and how you plan to use the system.

No. Our software services and monitoring platform are included at no additional charge with our equipment. Simply provide a working WiFi network with internet access and keep the equipment connected to enjoy the software services and view your system's status remotely.

In many cases, yes. If your home already uses a generator and grid electricity, our engineers can assess whether your existing equipment can be integrated into a proposed solar and battery system. The final design depends on your generator model, electrical setup, property needs and site assessment.

In many cases, a solar and battery system can be expanded as your energy needs change. Contact our engineers to discuss your future plans and receive a tailored expansion proposal. Available options depend on your existing system design, roof space, equipment compatibility and electrical capacity.

Yes. We provide solar panel cleaning and reinforcement services to help care for your installation. Our team can assess your needs and agree the service scope with you before arranging the work.

Local Parts Stock is part of our service offering. Availability depends on the specific part and system model. Contact our team to check the part you need, current stock and the next steps before arranging a replacement.

There is no single timeline for every property. Ask for a schedule with your proposal so equipment availability, site preparation and any required approvals can be considered for your project.